Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the cylinder head, cylinder, and piston of the Yamaha Majesty 250.

Model: Yamaha Majesty 250
Part: Cylinder head

Video tutorial

In this guide we will see the instructions that will allow us to disassemble and replace the cylinder head, cylinder, and piston (thermal group) of the Yamaha Majesty 250 scooter. In this case, the disassembly operation of the thermal group with the entire engine block removed is carried out; so we unscrew the cylinder head screws to remove it, then also remove the cylinder, as shown in the video.

At this point, we remove the clip and the piston pin, removing it from the connecting rod; we replace and correctly install the new thermal group, applying the reverse procedure!


Posted on 27 October 2025 by ScegliAuto


Related tutorials

How to Reset the V-Belt Light on a Yamaha Majesty 250
How to Reset the V-Belt Light on a Yamaha Majesty 250
Majesty 250 To manually reset the V-Belt light that appears on the dashboard of your Yamaha Majesty 250, follow this guide. First, completely turn off the motorc…
How to Change the Engine Oil in a Yamaha Majesty 250?
How to Change the Engine Oil in a Yamaha Majesty 250?
Majesty 250 Good morning, today you will change the engine oil in your Yamaha Majesty 250. Start by warming up the engine for 5 minutes, then place the scooter o…
How to Reset the "Service" Light on a Yamaha Majesty 250
How to Reset the "Service" Light on a Yamaha Majesty 250
Majesty 250 Before you begin, sit on the seat of your Yamaha Majesty 250. Start by pressing and holding the internal button located near the handlebars, below th…

How to Dismantle the Centre Fairing of the Piaggio MP3

Below are the instructions to dismantle and replace the centre fairing of the Piaggio MP3 500 and 250 scooter. First, place the scooter on its stand and start by removing the small side plastic cover, unscrewing the fixing screws located underneath. Then, remove the fuel cap and disconnect the centre fairing by unplugging the electrical connector found underneath, as shown in the video. At this point, replace and install the new fairing, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos