Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the V-Belt Light on a Yamaha Majesty 250

Model: Yamaha Majesty 250
Part: Warning light – error code

Video tutorial

To manually reset the V-Belt light that appears on the dashboard of your Yamaha Majesty 250, follow this guide. First, completely turn off the motorcycle and place it on its stand correctly.

Next, remove the rear panel (where the battery is located) and find the white connector. Now, turn on the ignition.

Go back to the connector and disconnect it. After about 3 seconds, reconnect it and turn off the ignition of your Yamaha Majesty 250. The reset is now successfully completed, and the light will not come on again at the next start.


Updated on 9 June 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Yamaha Majesty 250
How to Reset the "Service" Light on a Yamaha Majesty 250
Majesty 250 Before you begin, sit on the seat of your Yamaha Majesty 250. Start by pressing and holding the internal button located near the handlebars, below th…
How to Change the Engine Oil in a Yamaha Majesty 250?
How to Change the Engine Oil in a Yamaha Majesty 250?
Majesty 250 Good morning, today you will change the engine oil in your Yamaha Majesty 250. Start by warming up the engine for 5 minutes, then place the scooter o…
Disassembly of the cylinder head, cylinder, and piston of the Yamaha Majesty 250.
Disassembly of the cylinder head, cylinder, and piston of the Yamaha Majesty 250.
Majesty 250 In this guide we will see the instructions that will allow us to disassemble and replace the cylinder head, cylinder, and piston (thermal group) of t…

How to Assemble the Engine Block of the Husaberg FE 501

Here are the instructions to assemble the engine block of the Husaberg FE 501 enduro bike. First, assemble the engine transmission by installing the gear ratios and then the clutch assembly; after that, install the engine's thermal part by reassembling the crankshaft and then the cylinder head assembly (including piston, cylinder, and head), as shown in the video. At this point, install the stator and flywheel, as well as the electrical components of the engine, following the video tutorial to the end for reassembly!

Watch the video!


by ScegliAuto

More videos