Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial we can see how to replace the headlight bulb in the Yamaha FZ6R, an extremely simple and quick operation. First of all, make sure that the instrument panel is turned off, then remove both side covers indicated and the entire plastic frame of the instrument panel. Next, locate the connector located on the back of the headlight, disconnect it, remove the rubber circular cap and extract the old bulb by releasing the metal clip. At this point, all that remains is to insert the replacement bulb and reassemble everything following the reverse procedure.

Posted on 11 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the front headlight bulb on a Yamaha MT-07
Replacing the front headlight bulb on a Yamaha MT-07
Mt 07 In today's tutorial video, you will learn how to remove and replace the front headlight bulb on a Yamaha MT-07. First, unscrew the headlight mounting…
How do you replace the levers on the Yamaha FZ6R?
How do you replace the levers on the Yamaha FZ6R?
Fz6 The levers that are installed on the Yamaha FZ6R can be replaced by loosening the screws that fix them to their housings on the side of the handlebar…
How to Replace the Spark Plugs on the Yamaha FZ6R?
How to Replace the Spark Plugs on the Yamaha FZ6R?
Fz 6 To replace the spark plugs on the Yamaha FZ6R, you need to loosen the screws that secure the fuel tank to its housing. The tank can then be completel…

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos