Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Tmax 560
Part: Key

In this tutorial, we can see how to program a new remote control in the Yamaha TMAX 560 scooter, a very simple and quick operation. To do this, we will need the emergency code provided at the time of purchase. First of all, hold down the start button until the key symbol appears on the display, then release the button and repeat the operation two more times. Next, retrieve the code, hold down the button again until you get the number of flashes of the light corresponding to the first digit and repeat the step for the remaining digits. At this point, all that's left to do is press the power button on the new remote control and verify its correct operation.

Posted on 21 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on a Yamaha TMAX 560 Scooter
How to Change the Engine Oil on a Yamaha TMAX 560 Scooter
Tmax 560 Changing the engine oil on a Yamaha TMAX 560 scooter, as shown in this tutorial, is a very simple and quick task. First, ensure the engine is cool en…
How to Reset the Service on a Yamaha TMAX 560 Scooter?
How to Reset the Service on a Yamaha TMAX 560 Scooter?
Tmax 560 In this tutorial, we will see how to reset the service on the Yamaha TMAX 560 scooter, a very simple and quick operation, to be performed only after …
How to Replace the Battery in a Yamaha TMAX 560 Scooter
How to Replace the Battery in a Yamaha TMAX 560 Scooter
Tmax 560 In this tutorial, you will see how to replace the battery in the Yamaha TMAX 560 scooter, a very simple and quick operation. First, ensure that the k…

How to Remove the Final Drive from a BMW R 1200 GS?

To remove the final drive from a BMW R 1200 GS, loosen the bolts securing the exhaust so it can be removed along with the rear wheel. The rear wheel will also be removed by unscrewing the five bolts that secure it to the swingarm. Next, detach the brake caliper by unscrewing the mounting bolts and remove the rear part of the swingarm. Inside, you will find the final drive, which should be extracted and replaced with a new spare part; after replacement, reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos