|
Do it yourself
| |||
| ||||
|
Model: Yamaha Xmax 250
How to change the engine oil on a Yamaha Xmax? Follow this guide to perform the replacement. Position the scooter on the original stand, use a spanner to unscrew the oil sump bolt (drain the fluid into a container). Unscrew the securing screws of the container cap where the oil filter is located. Remove the worn oil filter kit and fit a new one after reassembling the tension spring (check the gasket around the metal cap). Finally, top up with new fluid in the engine and close with the plastic cap.
Updated on 8 March 2026 by ScegliAuto
Video tutorial
Related tutorials
Xmax 250
Discover the procedure necessary to replace the engine oil and oil filter while performing the routine maintenance service on the Yamaha Xmax 250 sco…
Xmax 250
In order to replace the motor oil of the Yamaha Xmax 250, you will need to loosen the drain plug of the oil pan located at the central bottom part of…
Xmax 250
In this short video, learn how to change the engine oil on your Yamaha Xmax 250. If possible, place the scooter on a hydraulic workbench for easier a…
|
How to Service the Beta RR 350
This video will illustrate the steps to perform the routine maintenance service, replacing the engine oil and oil filter on the Beta RR 350 enduro bike. First, place the bike on a stand and start by loosening the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean the small oil filter (replacing it with a new one if too dirty). Finally, top up with new oil, of the correct type for your engine, filling to the maximum level! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.061
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |