Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Tmax 530
Part:

Have you covered enough miles on your scooter and now it’s time to replace the drive belt? Good, you’re in the right place. I will explain how to do it step by step. Unscrew the two screws from the cover above the belt with a socket. Remove another two screws to take off the lower cover. Loosen the rear wheel hub to slightly move it forward, thus freeing the belt. Remove the left rear footpeg and you can finally slide out the belt to be replaced. Insert the new part and to reassemble everything, proceed in reverse order.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Drive Belt on the Yamaha Tmax 530
Replacing the Drive Belt on the Yamaha Tmax 530
Tmax 530 Follow these instructions to remove and replace the drive belt on the Yamaha Tmax 530 scooter. First, place the central stand and start by removing t…
How to Set the Clock on the Yamaha T-Max 530?
How to Set the Clock on the Yamaha T-Max 530?
Tmax 530 To adjust the clock on the Yamaha T-Max 530, turn the key to switch on the instrument panel. Then, press and hold both buttons on either side of the …
How to Reset the V-BELT Light on the Yamaha T-MAX 500 Scooter?
How to Reset the V-BELT Light on the Yamaha T-MAX 500 Scooter?
Tmax 530 In this tutorial, you will see how to reset the V-Belt light on the Yamaha TMAX 530 scooter, which indicates the need for a service on the drive belt…

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos