Do it yourself
Frequently asked questions about cars and motorcycles

Model: Yamaha Tmax 530
Part:

Follow these instructions to remove and replace the drive belt on the Yamaha Tmax 530 scooter. First, place the central stand and start by removing the side plastic fairing on the transmission side; then, unscrew the fixing screws of the cover to access the drive belt, as shown in the video. Next, remove the fan and the variator by unscrewing the central nuts; then, take out the drive belt and replace it with the new one, following the video tutorial to the end!

Updated on 5 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Tmax 530 To replace the belt on a Yamaha Tmax 530, loosen all the screws securing the side panels on the right side of the bike. Once all these screws are loo…
Tmax 530 Have you covered enough miles on your scooter and now it’s time to replace the drive belt? Good, you’re in the right place. I will explain how to do …
Tmax 530 Today's guide will illustrate the procedure for removing and replacing the battery of the Yamaha Tmax 530 scooter. First, place the scooter on its ce…

How to Replace the Front Bulb on the Honda SH 125

This tutorial explains the steps to replace the front headlamp bulb on the Honda SH 125. This is a very simple procedure. First, remove the front shield of the scooter to access the bulb replacement. To perform this first step, unscrew the lower screw and the two upper screws that secure the cover. At this point, the bulb will be clearly visible. Simply unscrew the bulb and insert a new one. It is recommended to carry out this procedure after ensuring that the bulb to be removed has cooled down.

Watch the video!


by ScegliAuto

More videos