Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the V-BELT Light on the Yamaha T-MAX 500 Scooter?

Model: Yamaha Tmax 530
Part: Warning light – error code

Video tutorial

In this tutorial, you will see how to reset the V-Belt light on the Yamaha TMAX 530 scooter, which indicates the need for a service on the drive belt. To perform the reset, start by inserting the key and turning on the instrument panel.

Then, using the button located under the left handle, scroll through the "TRIP" section of the display until you reach the entry following "Trip 2". Once done, press the same button once, and when the kilometres at the top start to flash, release it and then press and hold it a second time until the reset is complete.


Updated on 2 June 2026 by ScegliAuto


Related tutorials

How to Open the Seat of the Yamaha T-MAX 530
How to Open the Seat of the Yamaha T-MAX 530
Tmax 530 This video shows how easy it is to open the seat of the Yamaha T-MAX 530: ensure the scooter is off. The seat opens with a switch that, depending on …
How to replace the engine oil in the Yamaha TMAX 530 scooter?
How to replace the engine oil in the Yamaha TMAX 530 scooter?
Tmax 530 In this tutorial we can see how to replace the engine oil in the Yamaha TMAX 530 scooter, an extremely simple and fast operation. First of all, we wa…
How to Replace the Drive Belt on a Yamaha T Max 530
How to Replace the Drive Belt on a Yamaha T Max 530
Tmax 530 Have you covered enough miles on your scooter and now it’s time to replace the drive belt? Good, you’re in the right place. I will explain how to do …

How to Replace the Battery in a Harley-Davidson Sportster Iron 883?

In this tutorial, you will see how to replace the battery in a Harley-Davidson Sportster Iron 883, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the single bolt securing the seat, then remove the left plastic cover by unlocking the relevant clips. Next, remove the 3 fuses, disconnect the 2 terminals starting with the negative, and unscrew the bolt of the mounting bracket. At this point, you can extract the old battery, insert the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos