Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha T Max
Part: Key

In this video, we can see the emergency start procedure for a Yamaha T-max 560. Upon delivery of the vehicle, you will receive, in addition to the two transponders, the mechanical key and the key code. Use the mechanical key to open the seat; this will allow you to check if the battery is functioning correctly, indicated by the courtesy light inside being on. To start the scooter, press the start button and lift and close the seat three times. The key warning light will appear on the dashboard. Now, using the button on the left side of the handlebars, enter the key code, making the light flash each time for as many times as each number in the code. Finally, press the ignition button; the dashboard lights up and you can set off.

Posted on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to access the fuse box of the Yamaha T Max?
How to access the fuse box of the Yamaha T Max?
T Max .. The Yamaha T Max 560 scooter model of 2022 has a fuse box divided into two parts inside. The fuse box is located under.. …
Battery Replacement for the Yamaha T-Max 500
Battery Replacement for the Yamaha T-Max 500
T Max In this brief and simple guide, you will find the main instructions for removing and replacing the battery of the Yamaha T-Max 500 scooter. First, mo…
Replacing the Front Mudguard on the Yamaha T Max
Replacing the Front Mudguard on the Yamaha T Max
T Max This guide provides instructions for removing and replacing the front mudguard on the Yamaha T Max scooter. First, place the scooter on the centre st…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos