Do it yourself
Frequently asked questions about cars and motorcycles

Model: Yamaha T Max
Part: Battery

In this brief and simple guide, you will find the main instructions for removing and replacing the battery of the Yamaha T-Max 500 scooter. First, move to the front of the scooter and start by removing the plastic panels on the sides; underneath, you will find the battery, as shown in the video. Next, disconnect both battery terminals (positive and negative) to remove it and replace it with a new one (with the same amperage); then, refit it in place and reconnect the electrical terminals!

Updated on 18 June 2026 by ScegliAuto

Video tutorial

Related tutorials

T Max .. as well as the rear ones, on the 2008 Yamaha T-Max 500 scooter. First, place the scooter on its centre stand and start by removing the central pin of.. …
T Max ..nd replace the air filter on a 2010 Yamaha T-Max 500 scooter, following these simple steps. First, remove the lower side fairing found on the footboard, t.. …
T Max .. replace the front headlamp bulb on a Yamaha T-max 500 scooter. You do not need to remove the front fairing; simply lean down to access it. Start by.. …

How to Remove the Engine from a KTM EXC 300?

To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is removed, unscrew the bolts that secure the cylinder at the top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. The necessary parts can now be replaced, and you can subsequently reassemble all the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos