|
Do it yourself
| |||
| ||||
Model: Yamaha T Max
This guide outlines the main steps to remove and replace the front headlamp bulb on a Yamaha T-max 500 scooter. You do not need to remove the front fairing; simply lean down to access it. Start by removing the rubber membrane as shown in the video. Next, disconnect the electrical connector of the bulb and unclip the metal spring to remove it and replace it with a new one. Insert the new bulb of the correct type (H7 in this case) and reassemble everything!
Updated on 5 May 2026 by ScegliAuto
Video tutorial
Related tutorials
T Max
.. as well as the rear ones, on the 2008 Yamaha T-Max 500 scooter. First, place the scooter on its centre stand and start by removing the central pin of.. …
T Max
.. and replacing the battery of the Yamaha T-Max 500 scooter. First, move to the front of the scooter and start by removing the plastic panels on.. …
T Max
.. the coolant or antifreeze on the Yamaha T-Max 500. First, remove the side fairings located at the bottom of the scooter to expose the drain plug;.. …
|
How to Replace the Tyres on the Husaberg FE 450
In this guide, follow the instructions to remove and replace the tyres on the Husaberg FE 450 enduro bike. First, place the bike on a stand and lift the wheel off the ground; then, undo the bolts securing the brake caliper to remove it, as shown in the video. Next, unscrew the central axle of the wheel, removing the tyre from the rim (deflating it and using levers); then install the new tyre, ensuring it has the correct dimensions, following the video tutorial to the end! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |