Do it yourself
Frequently asked questions about cars and motorcycles
This guide provides the main instructions for replacing the coolant or antifreeze on the Yamaha T-Max 500. First, remove the side fairings located at the bottom of the scooter to expose the drain plug; then remove the bolt to allow all the old fluid to drain into a container. At this point, screw the drain plug back in and pour the new fluid into the expansion tank, removing the filler cap; fill to the maximum level, topping up if necessary!

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

T Max .. and replacing the battery of the Yamaha T-Max 500 scooter. First, move to the front of the scooter and start by removing the plastic panels on.. …
T Max .. replace the front headlamp bulb on a Yamaha T-max 500 scooter. You do not need to remove the front fairing; simply lean down to access it. Start by.. …
T Max ..nd replace the air filter on a 2010 Yamaha T-Max 500 scooter, following these simple steps. First, remove the lower side fairing found on the footboard, t.. …

How to reset the oil light on the Honda SH 125

If the oil light appears on your Honda SH 125 dashboard despite having recently changed the oil, don't worry as you can resolve this minor issue with a simple manual reset procedure. First, turn on the ignition and hold down the "Info A" and "Info B" buttons located at the bottom of the left knob. At this point, press the "Info B" button multiple times until the oil change indicator starts to flash. Finally, press the "Info A" button once to perform the reset. The procedure is now complete.

Watch the video!


by ScegliAuto

More videos