Do it yourself
Frequently asked questions about cars and motorcycles

Model: Yamaha Sr 500
Part: Oil filter

The instructions in this guide will allow you to perform routine maintenance by replacing the engine oil and oil filter on the Yamaha SR 500 motorcycle. First, place the motorcycle on its stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes. Unscrew the screws of the oil filter cover to remove the cartridge, replacing it with a new one as shown in the video. At this point, top up with new engine oil, following the instructions in the user and maintenance manual.

Posted on 21 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Tmax 500 In this video tutorial, you will see step-by-step instructions for performing the service, which includes changing the engine oil and oil filter, on …
Mt 09 These brief steps will show you how to perform the routine maintenance service by changing the engine oil and oil filter on a Yamaha MT-09 motorcycle…
Mt 10 Today, we will go through the necessary guide on how to perform routine maintenance by changing the engine oil and oil filter on the Yamaha MT-10. Fi…

How do you reset the Oil Check light on the Sym VF 185?

In order to reset the Oil Check light on the Sym VF 185, you need to turn on the instrument panel by turning the key in the ignition switch. Once the panel is on, you can press and hold the button located at the bottom right of the instrument panel for a few seconds. You will need to continue holding the button for a few seconds and then release it before pressing the next button. This will make the Oil Check light disappear from the instrument panel, and you can turn it off again by turning the key in the opposite direction.

Watch the video!


by ScegliAuto

More videos