Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video tutorial, you will see step-by-step instructions for performing the service, which includes changing the engine oil and oil filter, on the 2017 Yamaha Tmax 500 SX scooter. First, position the scooter on the centre stand and start by removing the oil drain bolt located under the engine, using a socket spanner; allow the oil to drain into a container for about ten minutes. At this point, use the oil filter wrench to unscrew it, as shown in the video; replace it with a new one, tightening it by hand; then pour in the new engine oil!

Updated on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on a Yamaha TMAX 500 Scooter?
How to Change the Engine Oil on a Yamaha TMAX 500 Scooter?
Tmax 500 In this tutorial, you will see how to change the engine oil on a Yamaha TMAX 500 scooter, a very simple and quick operation. First, ensure the engine…
How to replace the transmission oil in the Yamaha TMAX 500 scooter?
How to replace the transmission oil in the Yamaha TMAX 500 scooter?
Tmax 500 In this tutorial we can see how to replace the transmission oil in the Yamaha TMAX scooter, an extremely simple and quick operation. First of all, we…
How to Reset the Oil Light on a Yamaha TMax 500
How to Reset the Oil Light on a Yamaha TMax 500
Tmax 500 In this new guide for all Yamaha TMax 500 owners, we will discover how to manually reset the oil light that appears on the dashboard. First, position…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos