Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Transmission Oil on a Yamaha TMAX 500 Scooter?

Model: Yamaha Tmax 500
Part: Transmission fluid

Video tutorial

In this tutorial, you will see how to change the transmission oil on the Yamaha TMAX scooter, a very simple and quick operation. First, position a container underneath the transmission casing, then remove the plastic cover by unscrewing the two screws with a cross-head screwdriver.

Next, locate the drain hole bolt, unscrew it with a 12 mm socket, and allow all the oil in the system to drain out. At this point, simply tighten the bolt and pour in the new oil through the designated hole.


Updated on 18 October 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a Yamaha TMAX 500 Scooter
How to Replace the Air Filter on a Yamaha TMAX 500 Scooter
Tmax 500 In this tutorial, you will see how to replace the air filter on a Yamaha TMAX 500 scooter, a very simple and quick operation. First, unscrew the fast…
How to Change the Engine Oil on a Yamaha TMAX 500 Scooter?
How to Change the Engine Oil on a Yamaha TMAX 500 Scooter?
Tmax 500 In this tutorial, you will see how to change the engine oil on a Yamaha TMAX 500 scooter, a very simple and quick operation. First, ensure the engine…
How to Reset the Drive Belt Service on a Yamaha TMAX 500 Scooter?
How to Reset the Drive Belt Service on a Yamaha TMAX 500 Scooter?
Tmax 500 This tutorial shows how to reset the drive belt service on a Yamaha TMAX 500 scooter, a very simple and quick operation to perform only after complet…

How to Replace the Battery in a Harley-Davidson Sportster Iron 883?

In this tutorial, you will see how to replace the battery in a Harley-Davidson Sportster Iron 883, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the single bolt securing the seat, then remove the left plastic cover by unlocking the relevant clips. Next, remove the 3 fuses, disconnect the 2 terminals starting with the negative, and unscrew the bolt of the mounting bracket. At this point, you can extract the old battery, insert the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos