Do it yourself
Frequently asked questions about cars and motorcycles

Model: Yamaha Fz 6
Part: Air filter

Remove the original engine air filter from a Yamaha Fz6. Follow this guide to proceed with the replacement. Position the motorcycle on a centre stand, remove the seat from the motorcycle; lift the tank. Using a screwdriver, unscrew the securing screws of the housing, uncover the cap and remove the air filter. Install a new one if damaged, or reposition the old one after cleaning it (use an air compressor). Finally, close the air filter housing, reposition the tank and reassemble the seat.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Fz 6 Before you can start, position your Yamaha FZ6 upright. Begin by unscrewing and removing the bolts that secure the tank, then lift the front of the t…
Fz 6 How to replace oil and oil filter on a Yamaha Fz6? Follow this guide to perform maintenance. Position your bike on its original stand; using a fixed …
Fz 6 To change the engine oil of the Yamaha FZ6, unscrew the drain plug of the oil reservoir, located at the bottom of the bike, near the start of the exh…

How to Replace the Battery of the Kymco Agility 125?

To replace the battery of the Kymco Agility 125, lift the seat to access the compartment underneath. At the rear of the under-seat compartment, you will find the battery under the corresponding panel. By unscrewing the screws that secure the panel, you can access the battery underneath, which must be freed from the corresponding securing screws and the appropriate power cables. Once the device is free, insert the new one, connecting and securing it properly, and cover everything with the panel.

Watch the video!


by ScegliAuto

More videos