Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Fz 6
Part: Air filter

Before you can start, position your Yamaha FZ6 upright. Begin by unscrewing and removing the bolts that secure the tank, then lift the front of the tank and disconnect the relevant electrical connectors and hoses. Next, you will need to remove the tank itself. By doing this, you will reach the air filter cover, which you will need to remove by unscrewing the relevant fixing screws. Proceed to unclip and remove the air filter from its housing. Once you have completed this step, you will have finished the removal. To install the new air filter, simply follow these steps in reverse, and the replacement will be complete.

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Original Engine Air Filter from a Yamaha Fz6
Removing the Original Engine Air Filter from a Yamaha Fz6
Fz 6 Remove the original engine air filter from a Yamaha Fz6. Follow this guide to proceed with the replacement. Position the motorcycle on a centre stand…
How to Replace Oil and Oil Filter on a Yamaha Fz6
How to Replace Oil and Oil Filter on a Yamaha Fz6
Fz 6 How to replace oil and oil filter on a Yamaha Fz6? Follow this guide to perform maintenance. Position your bike on its original stand; using a fixed …
How to Change the Engine Oil of the Yamaha FZ6?
How to Change the Engine Oil of the Yamaha FZ6?
Fz 6 To change the engine oil of the Yamaha FZ6, unscrew the drain plug of the oil reservoir, located at the bottom of the bike, near the start of the exh…

How to Replace the Battery of the Kymco Agility 125?

To replace the battery of the Kymco Agility 125, lift the seat to access the compartment underneath. At the rear of the under-seat compartment, you will find the battery under the corresponding panel. By unscrewing the screws that secure the panel, you can access the battery underneath, which must be freed from the corresponding securing screws and the appropriate power cables. Once the device is free, insert the new one, connecting and securing it properly, and cover everything with the panel.

Watch the video!


by ScegliAuto

More videos