Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of the Yamaha TMax 500 Scooter

Model: Yamaha Tmax 500
Part: Engine oil

This video is currently unavailable

This guide shows how to replace the engine oil of the Yamaha TMax 500 scooter. No specific tools are required for this operation.

For disposing of the old lubricant, it is advisable to contact a specialised centre. The first step is to secure the scooter and place a container under the oil sump plug, located on the left side between the two stands.

After unscrewing the closing plug, allow all the fluid to drain; clean the plug and screw it back in place. Under the footboard, there is the oil filter that needs to be replaced using the appropriate tool.

At this stage, it is likely that some oil will still leak out. Lubricate the seal of the new filter with oil and refit it in position. Fill the reservoir with new oil, complying with the specifications required by the manufacturer.

You will need a bit more oil than specified in the manual to fill the new filter. Now, start the scooter to circulate the oil correctly.

Turn off the engine and wait a few minutes, then check the oil level; top up if necessary.


Updated on 17 April 2026 by ScegliAuto


Related tutorials

Change the engine oil and oil filter on the 2017 Yamaha Tmax SX
Change the engine oil and oil filter on the 2017 Yamaha Tmax SX
Tmax 500 In this video tutorial, you will see step-by-step instructions for performing the service, which includes changing the engine oil and oil filter, on …
How to Change the Engine Oil on a Yamaha TMAX 500 Scooter?
How to Change the Engine Oil on a Yamaha TMAX 500 Scooter?
Tmax 500 In this tutorial, you will see how to change the engine oil on a Yamaha TMAX 500 scooter, a very simple and quick operation. First, ensure the engine…
How to reset the engine oil light on the Yamaha Tmax 500
How to reset the engine oil light on the Yamaha Tmax 500
Tmax 500 After replacing the engine oil and oil filter, it will be necessary to reset the maintenance service light on the Yamaha Tmax 500 scooter. First, put…

Replacing the Rear Brake Pads of the BMW G310 GS

Follow these brief instructions to remove and replace the rear brake pads (this also applies to the front ones) of the BMW G310 GS motorcycle. First, place the bike on a stand and start by removing the pin and the clip from the rear brake caliper; then remove the old brake pads as shown in the video. Next, clean the caliper of any residual dirt, install the new original brake pads, and secure the pin and clip to lock everything in place, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos