Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Levers on a Yamaha X-Max 250

Model: Yamaha Xmax 250
Part:

Video tutorial

In this video tutorial, you will learn how to remove and replace the front brake levers on the Yamaha X-Max 125, following the instructions below. First, obtain the correct new levers; then use a socket spanner to undo the central fixing pins of the front brake levers, as shown in the video.

At this point, remove them and replace the levers with the new ones, ensuring to insert the spacers between the levers; tighten the central bolt properly and finally adjust the lever travel!


Updated on 20 April 2026 by ScegliAuto


Related tutorials

How to Replace the Coolant on the Yamaha X-max 250
How to Replace the Coolant on the Yamaha X-max 250
Xmax 250 .. to bleed and replace the coolant on the Yamaha X-max 250 by following these simple steps. First, position your scooter on the centre stand and start by.. …
How to Remove the "V-Belt" Warning Light on a Yamaha X-MAX 250 Scooter?
How to Remove the "V-Belt" Warning Light on a Yamaha X-MAX 250 Scooter?
Xmax 250 .. has appeared on the dashboard of your Yamaha X-MAX 250 scooter. Before performing this operation, ensure you have completed the required maintenance,.. …
How to Reset the Service Light on the Yamaha XMax 250
How to Reset the Service Light on the Yamaha XMax 250
Xmax 250 .. service light on the dashboard of your Yamaha XMax 250 without any difficulty, even if you are on your own. Follow the steps outlined below. First,.. …

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos