Do it yourself
Frequently asked questions about cars and motorcycles
In today's tutorial, we will see how to bleed and replace the coolant on the Yamaha X-max 250 by following these simple steps. First, position your scooter on the centre stand and start by unscrewing the drain bolt for the antifreeze or coolant located under the engine, allowing it to drain into a container for about ten minutes. Next, remove the under-seat panel to access the filler cap and pour in the new coolant of the correct type; fill it to the maximum level, topping up if necessary!

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Xmax 250 In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by ra…
Xmax 250 .. has appeared on the dashboard of your Yamaha X-MAX 250 scooter. Before performing this operation, ensure you have completed the required maintenance,.. …
Xmax 250 In this video tutorial, you will learn how to remove and replace the front brake levers on the Yamaha X-Max 125, following the instructions below. Fi…

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos