Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Yzf R6
Part: Oil filter

To replace the air filter on the Yamaha YZF-R6, remove the bolts securing the fuel tank and lift its front part, just below the handlebars. Here you will find the air filter box, which is also secured with screws. Once opened, you can slide the air filter out of its housing and replace it. To access the oil filter, you will need to loosen the bolts securing the fairing on the left side of the bike. The fairing pieces to remove are shown in the tutorial: once removed, you can access the oil filter, which can be taken out of its housing by simply twisting it. After removing it, you can replace it and reassemble all the parts previously removed.

Updated on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Oil Filter on the Yamaha YZF R6
How to Change the Engine Oil and Oil Filter on the Yamaha YZF R6
Yzf R6 In today's tutorial video, you will perform the routine maintenance service by replacing the engine oil and oil filter on a Yamaha YZF R6. First, rem…
How to Replace the Clutch on a Yamaha YZF-R6
How to Replace the Clutch on a Yamaha YZF-R6
Yzf R6 In this guide, we will cover the main steps to remove and replace the clutch discs on a Yamaha YZF-R6 motorcycle. First, place the bike on a stand an…
How to Change the Engine Oil on a Yamaha YZF R6
How to Change the Engine Oil on a Yamaha YZF R6
Yzf R6 This guide shows how to perform the engine oil change on a Yamaha YZF R6. After securing the bike, unscrew the fastening bolts of the left lower fair…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos