Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Yzf R6
Part: Engine oil

In today's tutorial video, you will perform the routine maintenance service by replacing the engine oil and oil filter on a Yamaha YZF R6. First, remove the side and lower fairings by unscrewing the fastening screws; then, remove the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes. Now, unscrew the oil filter with the appropriate tool and replace it with the new one, screwing it in by hand as shown in the video; all that’s left is to pour the new oil into the sump!

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on a Yamaha YZF R6
How to Change the Engine Oil on a Yamaha YZF R6
Yzf R6 This guide shows how to perform the engine oil change on a Yamaha YZF R6. After securing the bike, unscrew the fastening bolts of the left lower fair…
How to Replace the Clutch on a Yamaha YZF-R6
How to Replace the Clutch on a Yamaha YZF-R6
Yzf R6 In this guide, we will cover the main steps to remove and replace the clutch discs on a Yamaha YZF-R6 motorcycle. First, place the bike on a stand an…
How to Replace the Oil and Air Filters on the Yamaha YZF-R6
How to Replace the Oil and Air Filters on the Yamaha YZF-R6
Yzf R6 To replace the air filter on the Yamaha YZF-R6, remove the bolts securing the fuel tank and lift its front part, just below the handlebars. Here you …

How to Top Up the Oil in the Aprilia SR 50 R Scooter?

In this tutorial, you will see how to top up the oil in the Aprilia SR 50 R scooter, a very simple and quick operation to perform periodically. First, open the small lower compartment and retrieve the supplied tools, then remove the screws securing the front panel located at the back. Once removed, locate the oil reservoir, which is on your left, and unscrew the cap. At this point, proceed to top up the oil until you reach the optimal level, then reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos