Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Aerox
Part:

In today's video, we will see how to remove and replace the drive belt on a Yamaha Aerox scooter by following these simple steps. First, position your scooter on the centre stand and start by unscrewing all the side screws of the transmission cover, located on the left; then unscrew the central nut of the fan using a socket wrench, as illustrated in the video. At this point, remove the central nut of the bell to take off the clutch; then replace the belt with the new one, following the video until the end!

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Fairing of a Yamaha Aerox
How to Remove the Front Fairing of a Yamaha Aerox
Aerox Before you can start, head to the front side of your Yamaha Aerox scooter. Begin by unscrewing and removing the screws that secure the front fairing …
How to Replace the Headlight Bulb on the Yamaha Aerox?
How to Replace the Headlight Bulb on the Yamaha Aerox?
Aerox To replace the headlight on the Yamaha Aerox, loosen the two screws located under the handlebars to completely remove the front fairing. Attached to …
Replacing Front Indicators and Rear Bulb on Yamaha Aerox
Replacing Front Indicators and Rear Bulb on Yamaha Aerox
Aerox On the Yamaha Aerox scooter, removing the side indicators is very simple: just unscrew the two small screws that are clearly visible from the outside…

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos