|
Do it yourself
| |||
| ||||
Model: Yamaha Xj6
Today, discover the steps to drain and replace the coolant in the Yamaha XJ6 motorcycle. First, bleed the old coolant or antifreeze by unscrewing the screw on the water pump, allowing it to drain into a container. Next, remove the side fairing of the radiator to unscrew the cap; then pour in the new coolant suitable for your radiator, topping up after starting the engine if necessary!
Updated on 7 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Xj6
Follow the steps to remove and replace the engine air filter on the Yamaha Xj6 as outlined below. First, remove the rider's seat and start unscrewing…
Xj6
In this tutorial, you will see how to change the engine oil on a Yamaha XJ6, a very simple and quick operation. First, ensure that the engine is cool…
Xj6
Today, follow this guide to remove and replace the battery on a Yamaha XJ6 motorcycle with these simple and quick steps. First, put the side stand do…
|
How to Check the Coolant Level in a Yamaha Xmax
In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |