Do it yourself
Frequently asked questions about cars and motorcycles

Model: Yamaha Xj6
Part: Headlight bulb

In today's tutorial, you will learn how to remove and replace the headlight bulb on the Yamaha Xj6 600 motorcycle in simple and quick steps. First, turn the handlebars to access the inside of the headlight; then remove the rubber cover by disconnecting the bulb's electrical connector, as shown in the video. At this point, disconnect the metal spring clip to remove and replace the bulb with a new one of the correct type (in this case, H4); insert it in the correct orientation and secure it properly inside the headlight!

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Xj6 Today, follow this guide to remove and replace the battery on a Yamaha XJ6 motorcycle with these simple and quick steps. First, put the side stand do…
Xj6 In this tutorial, you will see how to change the engine oil on a Yamaha XJ6, a very simple and quick operation. First, ensure that the engine is cool…
Xj6 In this tutorial, you will see how to set the time on the Yamaha XJ6, a very simple and quick operation, to be performed for example after disconnect…

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos