Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit the Screen on the Yamaha T Max

Model: Yamaha T Max
Part:

Video tutorial

To fit the screen on the Yamaha T Max, start by positioning the lower plastic, aligning the holes of the 3 screws with those on the frame. Then, screw in the 3 screws.

Next, take the screen and check for rubber grommets with threads in the holes of the lower plastic. Position it with the 6 screws and tighten them.

Now, take the front fairing, slot it in place, and screw in the 2 screws. Finally, fit the caps where the mirrors would go (as handlebar mirrors have been installed).

Remove the two screws, place the caps where the mirrors go, and tighten the 2 screws to secure them.


Updated on 26 May 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a Yamaha T-Max Mk1
How to Replace the Air Filter on a Yamaha T-Max Mk1
T Max The air filter on a Yamaha T-Max Mk1 is located at the front, so to replace it, you will need to remove the front fairing above the two headlights an…
Replacing the Transmission Chain Tensioner on the Yamaha T-Max
Replacing the Transmission Chain Tensioner on the Yamaha T-Max
T Max Today's main instructions will show you how to remove and replace the transmission chain tensioner on the Yamaha T-Max scooter. First, place the scoo…
Replacing the Key Fob Battery on Yamaha T-max 2015
Replacing the Key Fob Battery on Yamaha T-max 2015
T Max Learn how to remove and replace the battery in the remote control of a Yamaha T-max scooter, following these simple instructions. First, take the rem…

How to Replace the Fork on a Peugeot Kisbee?

To replace the fork on a Peugeot Kisbee, loosen the bolts securing the front wheel to its housing: you will need to unscrew the bolts that hold the corresponding nut to remove the central axle of the wheel. Next, disconnect the brake caliper from the disc and proceed by unscrewing the bolts of the fairings that surround the fork: at this point, you can loosen the bolts that secure the fork to the steering, allowing you to insert the new one. This can then be secured to the steering, covered with the fairing, and the front wheel installed.

Watch the video!


by ScegliAuto

More videos