Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Mt 125
Part: Air filter

This guide shows how to remove and replace the engine air filter on a Yamaha MT 125. First, place your bike on a stand and start by removing the rider and passenger seats; then remove the side plastic fairings by unscrewing the fastening screws located underneath, as shown in the video. Next, unscrew the screws on the fuel tank cap and underneath it to lift it; once removed, you can take off the air filter box cover, replace the filter with the new one, and reassemble everything!

Updated on 19 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the engine air filter of the Yamaha MT 125
Replacement of the engine air filter of the Yamaha MT 125
Mt 125 Today's step-by-step instructions will show us the process of disassembling and replacing the air filter of the Yamaha MT 125 motorcycle. First, we p…
How to Change the Engine Oil in the Yamaha MT-125?
How to Change the Engine Oil in the Yamaha MT-125?
Mt 125 As shown in this tutorial, changing the engine oil in the Yamaha MT-125 is an extremely simple and quick operation. First, wait for the engine to coo…
How to Remove the Front Headlight of the Yamaha MT 125
How to Remove the Front Headlight of the Yamaha MT 125
Mt 125 This guide provides instructions on how to remove and replace the front headlight of the Yamaha MT 125 motorcycle. First, place your motorcycle on a …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos