Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This short video tutorial shows the steps needed to activate or deactivate the TCS (Traction Control System) on a Yamaha Xmax. This is a very simple operation that can be done in just a few seconds. First, turn on the ignition of your scooter. Once done, press the "info" button located on the right side of the handlebars and keep pressing it until the "TCS" message appears on the information display of the speedometer. Now, to activate or deactivate it, simply hold the same "info" button for three seconds.

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to deactivate the traction control of the Yamaha Xmax 300?
How to deactivate the traction control of the Yamaha Xmax 300?
Xmax 300 To deactivate the traction control of the Yamaha Xmax 300, turn on the instrument panel by inserting the key into the ignition switch. Once the panel…
How to Reset the "Service" Light on a Yamaha Xmax 300
How to Reset the "Service" Light on a Yamaha Xmax 300
Xmax 300 Before you begin, sit on the seat of your Yamaha Xmax 300. Start by activating the instrument panel by turning the key in the ignition switch. Then, …
How to Replace the Battery on a Yamaha Xmax 300
How to Replace the Battery on a Yamaha Xmax 300
Xmax 300 Today, we will see the instructions that will allow us to remove and replace the battery of the Yamaha Xmax 300 scooter. First, place the scooter on …

How to reset the oil light on the Honda SH 125

If the oil light appears on your Honda SH 125 dashboard despite having recently changed the oil, don't worry as you can resolve this minor issue with a simple manual reset procedure. First, turn on the ignition and hold down the "Info A" and "Info B" buttons located at the bottom of the left knob. At this point, press the "Info B" button multiple times until the oil change indicator starts to flash. Finally, press the "Info A" button once to perform the reset. The procedure is now complete.

Watch the video!


by ScegliAuto

More videos