Do it yourself
Frequently asked questions about cars and motorcycles
In this brief and simple guide, follow the instructions to remove and replace the spark plug of the Yamaha Xmax 250 scooter engine. First, place your scooter on the centre stand and open the under-seat compartment by unscrewing the fixing screws to access the top of the engine, as shown in the video. At this point, disconnect the spark plug cap and use a socket wrench with an extension to unscrew and remove the spark plug, replacing it with a new one (of the correct type and with the same thread), and reassemble the under-seat compartment!

Updated on 30 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Xmax 250 This guide provides instructions for removing and replacing the spark plug of the engine on the Yamaha Xmax 250 scooter, as well as the Xmax 125. Fir…
Xmax 250 Today, let's discover useful information on how to disassemble and replace the spark plug of the Yamaha Xmax 250 scooter engine. First, we place the …
Xmax 250 In this video, you will see how to change the spark plug on the Yamaha XMax 250: the spark plug is located under the engine, behind the panel of the …

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos