Do it yourself
Frequently asked questions about cars and motorcycles
In this tutorial, you will see how to change the engine oil in a Yamaha TriCity scooter, a very simple and quick operation to perform every approximately 620 miles. First, wait for the engine to be completely cold, then position a container underneath and remove the drain bolt. Allow all the oil in the system to drain out, reinsert the bolt, and remove the cap located on the opposite side. At this point, you can add the necessary amount of oil to reach the ideal level, which can be checked using the dipstick.

Updated on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Tricity 300 Today we will learn how to adjust the time on the display of the instrument panel on the Yamaha Tricity 300 scooter. First, put the scooter on the ce…
Tricity 300 In this brief and simple guide, remove and replace the rear-view mirror on your Yamaha Tricity scooter. First, place the scooter on its centre stand …
Tricity 300 In this video, you can see where the battery is located on the Yamaha Tricity 300 scooter, useful for instance if you need to recharge it, replace it…

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos