Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video, you can see where the battery is located on the Yamaha Tricity 300 scooter, useful for instance if you need to recharge it, replace it, or perform an emergency start. As shown, it is located at the front of the scooter, specifically behind the left fairing. To access it, first unlock the three indicated plastic rivets, then lift the front rubber of the footrest and undo the bolt underneath it. To remove the battery, simply disconnect both terminals, starting with the negative, and unscrew the bolt of the securing strap.

Updated on 31 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the time on the Yamaha Tricity 300
How to change the time on the Yamaha Tricity 300
Tricity 300 Today we will learn how to adjust the time on the display of the instrument panel on the Yamaha Tricity 300 scooter. First, put the scooter on the ce…
How to change the battery of the Yamaha Tricity 300
How to change the battery of the Yamaha Tricity 300
Tricity 300 In this video, we can see how to change the battery of the three-wheeled scooter, which has two front wheels, the Yamaha Tricity 300. The YouTuber gi…
How to set the clock on the Yamaha Tricity 300
How to set the clock on the Yamaha Tricity 300
Tricity 300 The following steps will allow us to set the clock of the Yamaha Tricity 300 scooter. First, we put the scooter on the stand and start turning on the…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos