Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Fz6
Part: Headlight bulb

In this tutorial, you will see how to replace the headlight bulbs on a Yamaha FZ9, a very simple and quick operation. First, ensure that the key is not inserted. Then, go to the front of the headlamp in question and remove the side plastic cover. Next, locate the back of the unit, disconnect the power connector, and remove the large circular rubber cap. At this point, unlock the metal clip, extract the bulb from the housing, and insert the replacement. If necessary, repeat the operation on the opposite side.

Updated on 5 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil and Oil Filter Replacement on Yamaha FZ6 - FZ6 Fazer
Engine Oil and Oil Filter Replacement on Yamaha FZ6 - FZ6 Fazer
Fz6 In today’s tutorial, see how to replace the engine oil and oil filter while performing routine maintenance on a Yamaha FZ6 and FZ6 Fazer. First, posi…
How to Replace the Air Filter on a Yamaha FZ6
How to Replace the Air Filter on a Yamaha FZ6
Fz6 In this tutorial, you will see how to replace the air filter on a Yamaha FZ6, a very simple and quick operation. To do this, you will need a set of A…
Where Are the Fuses Located on a Yamaha FZ6?
Where Are the Fuses Located on a Yamaha FZ6?
Fz6 In this video, you can see where the fuses are located on the Yamaha FZ6, useful if you need to check the fuse of a malfunctioning device. As shown, …

How do you adjust the headlights of the Kymco Xciting S 400i?

In order to adjust the headlights of the Kymco Xciting S 400i, you need to completely remove the panel that is located under the front headlight and on the top of the front fork. Once this panel has been removed, you will be able to locate the bolts underneath that allow you to adjust the angle of the headlight. By tightening this bolt, you will notice that the beam of light from the headlight will rise; conversely, by loosening the bolt, you will notice that the beam will lower. Once the adjustment is complete, you can reinsert the panel.

Watch the video!


by ScegliAuto

More videos