Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Yamaha
    3. : Xvs 950a

Model: Yamaha Xvs 950a
Part: Battery

As shown in this tutorial, replacing the battery in the Yamaha XVS 950A is an extremely simple and quick operation. First, ensure that the key is not inserted, then remove the main seat and, using a 5mm hex key, loosen the bolts on both terminals. Next, disconnect the terminals starting with the negative, unclip the upper securing strap, and remove the battery from its housing. Now, simply insert the replacement and follow the reverse procedure to reassemble everything, making sure to reconnect the positive terminal first.

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery on a Yamaha XVS 650?
How to Replace the Battery on a Yamaha XVS 650?
Xvs 650 To replace the battery on a Yamaha XVS 650, loosen the screws securing the cover located on the right side of the bike, just beneath the seat. Once t…
How to Replace the Headlight Bulb in a Yamaha XVS 650?
How to Replace the Headlight Bulb in a Yamaha XVS 650?
Xvs 650 This tutorial shows how to replace the headlight bulb in a Yamaha XVS 650, a very simple and quick operation. First, ensure the key is not inserted f…
How to Change the Engine Oil on the Yamaha XVS 1100?
How to Change the Engine Oil on the Yamaha XVS 1100?
Xvs 1100 To change the engine oil on the Yamaha XVS 1100, unscrew the drain plug located at the central lower part of the bike to allow the used oil to flow c…

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos