Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Xmax 300
Part:

To replace the rear-view mirror on the Yamaha Xmax 300, loosen the screws located under the windscreen to completely remove it. Once the windscreen is detached, you can access the screws that secure the base of the mirror and completely remove it. After the old mirror is removed, position the new one, securing it in place with the appropriate screws. Finally, reposition the windscreen and secure it with screws to its base.

Updated on 18 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery of the Yamaha Xmax 300?
How to Replace the Battery of the Yamaha Xmax 300?
Xmax 300 You can replace the battery of the Yamaha Xmax 300 by loosening the screws that secure the front panel of the bike to its housing, located at the cen…
How to Replace the Rearview Mirror on Yamaha Xmax 300
How to Replace the Rearview Mirror on Yamaha Xmax 300
Xmax 300 In this brief guide, we will provide instructions to remove and replace the external rearview mirrors on the Yamaha Xmax 300 scooter in simple and qu…
How to deactivate the traction control of the Yamaha Xmax 300?
How to deactivate the traction control of the Yamaha Xmax 300?
Xmax 300 To deactivate the traction control of the Yamaha Xmax 300, turn on the instrument panel by inserting the key into the ignition switch. Once the panel…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos