Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Mt 125
Part: Headlight

This guide provides instructions on how to remove and replace the front headlight of the Yamaha MT 125 motorcycle. First, place your motorcycle on a stand and start unscrewing the fixing screws located above the front headlight and on the side; use an Allen key as shown in the video. Next, remove the plastic cover of the instrument panel, then take out the headlamp unit; disconnect the electrical connector of the bulb. If necessary, replace the front headlight bulb, applying the reverse procedure for reassembly!

Updated on 18 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on a Yamaha MT-125
How to Replace the Front Brake Pads on a Yamaha MT-125
Mt 125 Follow these steps to remove and replace the front brake pads on the Yamaha MT-125. First, place the motorcycle on a stand and begin unscrewing the b…
Replacing the Air Filter on a Yamaha MT 125
Replacing the Air Filter on a Yamaha MT 125
Mt 125 This guide shows how to remove and replace the engine air filter on a Yamaha MT 125. First, place your bike on a stand and start by removing the ride…
How to Set the Clock on the Yamaha MT 125?
How to Set the Clock on the Yamaha MT 125?
Mt 125 To set the clock on the Yamaha MT 125, turn on the instrument panel by rotating the key in the ignition switch. Once the panel is on, press and hold …

Replacing the Rear Light on a Harley Davidson Street Glide

In today's tutorial video, we will see how to remove and replace the rear light on a Harley Davidson Street Glide in simple and quick steps. First, place your bike on a stand and move to the rear; then use a socket and spanner to unscrew and remove the nuts found inside the wheel arch, at the height of the rear light, as shown in the video. At this point, disconnect the electrical connector to remove and replace the light with the new one; then reassemble everything, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos