Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Mt 09
Part: Air filter

This guide briefly outlines the steps to remove and replace the air filter of the Yamaha MT 09 motorcycle engine. First, place the bike on a stand and remove the rider's and passenger's seat; then unscrew the fuel tank mounting screws located on the sides, top, and bottom, as shown in the video. At this point, you will find the air filter box under the tank; remove the cover to extract and replace the cartridge with the new one, inserting it in the correct orientation. Finally, reassemble everything!

Updated on 24 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch on a Yamaha MT-09?
How to Replace the Clutch on a Yamaha MT-09?
Mt 09 You can replace the clutch on a Yamaha MT-09 by loosening the screws that secure the circular cover panel on the right side of the bike. Once the scr…
How to Change the Engine Oil in a Yamaha MT-09?
How to Change the Engine Oil in a Yamaha MT-09?
Mt 09 In this tutorial, you will see how to change the engine oil in a Yamaha MT-09, a very simple and quick operation. First, ensure that the engine is co…
How to Replace the Battery on a Yamaha MT-09
How to Replace the Battery on a Yamaha MT-09
Mt 09 Below are the steps to remove and replace the battery on a Yamaha MT-09 motorcycle, following the instructions provided. First, place your motorcycle…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos