Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Below are the instructions to reset the engine warning light on the Yamaha Tmax 500 scooter. First, place the scooter on the centre stand and connect your computer with the appropriate diagnostic software to the OBD port; then turn on the ignition, allowing the software to communicate with the ECU, as shown in the video. At this point, perform a scan for errors, following the procedure indicated to reset the engine warning light (after resolving the actual issue); ensure that the warning light has been reset on the dashboard!

Updated on 21 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on a Yamaha TMax 500
How to Reset the Oil Light on a Yamaha TMax 500
Tmax 500 In this new guide for all Yamaha TMax 500 owners, we will discover how to manually reset the oil light that appears on the dashboard. First, position…
How to Reset the Oil Light on a Yamaha Tmax 500
How to Reset the Oil Light on a Yamaha Tmax 500
Tmax 500 To reset the oil light on a Yamaha Tmax 500, turn on the ignition by rotating the key in the ignition switch. Once the instrument cluster is on, pres…
How to reset the V-Belt warning light on the Yamaha Tmax 500?
How to reset the V-Belt warning light on the Yamaha Tmax 500?
Tmax 500 To reset the V-Belt warning light on the Yamaha Tmax 500, turn on the ignition by turning the key in the ignition switch. Once the ignition is on, re…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos