Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will see how to reset the oil service on a Yamaha YZF R3, a very simple and quick operation to perform only after completing the required scheduled maintenance work. Start by inserting the key and turning on the ignition, then scroll through the various display screens until you reach the one labelled "Trip". Next, press and hold the upper left button on the dashboard until the mileage begins to flash, then press the button a second time. Finally, restart the ignition to complete the reset procedure.

Updated on 4 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Yamaha YZF-R3?
How to Reset the Service Light on a Yamaha YZF-R3?
Yzf R3 In this tutorial, we will see how to reset the service light on a Yamaha YZF-R3, an extremely simple and quick operation to perform only after comple…
How to Reset the Service on a Yamaha YZF R3?
How to Reset the Service on a Yamaha YZF R3?
Yzf R3 In this tutorial, you will see how to reset the service on a Yamaha YZF R3, a very simple and quick operation to perform only after completing the re…
How to replace the engine oil in the Yamaha YZF-R3?
How to replace the engine oil in the Yamaha YZF-R3?
Yzf R3 In this tutorial we can see how to replace the engine oil in the Yamaha YZF-R3, an extremely simple and quick operation. First of all, make sure that…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos