Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This tutorial shows how to replace the front headlamp bulbs on a Yamaha R6, a very simple and quick operation. First, ensure the key is not in the ignition, then go to the headlamp in question, locate the cap at the back, and remove it. Next, disconnect the power connector by pulling it outwards, unclip the metal clip, and remove the old bulb from the housing. Now, simply insert the replacement, avoiding direct contact with the glass, and follow the reverse procedure.

Updated on 10 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulbs in the Yamaha R6?
How to replace the front headlight bulbs in the Yamaha R6?
Yamaha R 6 As seen in this tutorial, replacing the front headlight bulbs in the Yamaha R6 is an extremely simple and quick operation. First, ensure that the key…
How to Replace the Headlight Bulbs on a Yamaha R6?
How to Replace the Headlight Bulbs on a Yamaha R6?
Yamaha R 6 Replacing the headlight bulbs on the Yamaha R6, as shown in this tutorial, is an extremely simple and quick task. First, ensure the key is not insert…
How to Replace the Exhaust on a Yamaha R6?
How to Replace the Exhaust on a Yamaha R6?
Yamaha R 6 To replace the exhaust on a Yamaha R6, loosen the bolts that secure the exhaust end can to its mounting on the right side of the bike, near the rear …

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos