Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulbs in the Yamaha R6?

Model: Yamaha Yamaha R 6
Part: Headlight bulb

Video tutorial

As seen in this tutorial, replacing the front headlight bulbs in the Yamaha R6 is an extremely simple and quick operation. First, ensure that the key is not inserted, then locate the large cap at the back of the headlight in question and remove it. Next, unclip the metal retaining clip, extract the old bulb from the housing, and disconnect it from the power connector.

At this point, simply connect the replacement, insert it into the headlight, and follow the reverse procedure. Avoid touching the new bulb directly with bare hands.


Updated on 15 September 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulbs on a Yamaha R6
How to Replace the Front Headlamp Bulbs on a Yamaha R6
Yamaha R 6 This tutorial shows how to replace the front headlamp bulbs on a Yamaha R6, a very simple and quick operation. First, ensure the key is not in the ig…
How do you replace the motor oil of the Yamaha R6?
How do you replace the motor oil of the Yamaha R6?
Yamaha R 6 It will be possible to replace the motor oil of the Yamaha R6 by loosening the screws that fasten the side panels of the motorcycle fairing: once the…
How to Replace the Exhaust on a Yamaha R6?
How to Replace the Exhaust on a Yamaha R6?
Yamaha R 6 You can replace the exhaust on the Yamaha R6 by unscrewing the screws that secure the exhaust terminal to the corresponding housing on the right side…

How to Reset the Service Light on a Honda PCX 150 Scooter

In this tutorial, you will see how to reset the service light on a Honda PCX 150 scooter, a very simple and quick operation to be performed only after completing all scheduled maintenance tasks. First, insert the key and leave it in the initial position, then press and hold the "SET" button located on the right side of the dashboard while simultaneously turning on the ignition. Keep the button pressed until the service light goes out, then restart the ignition to verify that the operation was successful.

Watch the video!


by ScegliAuto

More videos