Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, we will see how to reset the belt service light on the Yamaha XMAX 250 scooter, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance work. Start by removing the front fairing by taking out the appropriate screws, then locate the white connector and place it in a convenient position. Next, insert the key, turn on the ignition, and disconnect the connector. At this point, wait about 10 seconds, reconnect it, and restart the ignition to complete the reset.

Updated on 17 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the V-BELT Warning Light on the Yamaha XMAX 250 Scooter?
How to Reset the V-BELT Warning Light on the Yamaha XMAX 250 Scooter?
Xmax 250 In this tutorial, you will learn how to reset the service indicator for the drive belt on the Yamaha XMAX 250 scooter, indicated by the V-BELT warnin…
How to reset the belt change on the Yamaha Xmax 250
How to reset the belt change on the Yamaha Xmax 250
Xmax 250 In this guide we will see the instructions that will allow us to reset the transmission belt change of the Yamaha Xmax 250 scooter. First of all, we …
Resetting the Transmission Belt Change on Yamaha Xmax 250
Resetting the Transmission Belt Change on Yamaha Xmax 250
Xmax 250 These brief and simple steps will show you how to reset the transmission belt change on the Yamaha Xmax 250 scooter. First, place the scooter on the …

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos