Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time on a Yamaha TMAX 500 Scooter

Model: Yamaha Tmax 500
Part: Clock

Video tutorial

In this tutorial, you will learn how to set the time on a Yamaha TMAX 500 scooter, a very simple and quick operation to perform after replacing the battery or during the switch to daylight saving time. First, insert the key, then turn on the instrument cluster and press both the 'Select' and 'Reset' buttons located on the left side of the dashboard.

Once the time starts flashing, adjust the hour with the 'Reset' button, switch to minutes with the 'Select' button, and adjust them as well before saving the setting.


Updated on 21 September 2026 by ScegliAuto


Related tutorials

How to adjust the time on the Yamaha TMAX 500 scooter?
How to adjust the time on the Yamaha TMAX 500 scooter?
Tmax 500 In this tutorial, we can see how to adjust the time on the Yamaha TMAX 500 scooter, an extremely simple and quick operation, to be carried out for ex…
Replacing the Drive Belt on a Yamaha Tmax 500
Replacing the Drive Belt on a Yamaha Tmax 500
Tmax 500 Below are the instructions that will allow you to remove and replace the drive belt on the Yamaha Tmax 500 scooter. First, place it on the centre sta…
How to Reset the Drive Belt Service on a Yamaha TMAX 500 Scooter?
How to Reset the Drive Belt Service on a Yamaha TMAX 500 Scooter?
Tmax 500 This tutorial shows how to reset the drive belt service on a Yamaha TMAX 500 scooter, a very simple and quick operation to perform only after complet…

How to Replace the Battery in a Harley-Davidson Sportster Iron 883?

In this tutorial, you will see how to replace the battery in a Harley-Davidson Sportster Iron 883, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the single bolt securing the seat, then remove the left plastic cover by unlocking the relevant clips. Next, remove the 3 fuses, disconnect the 2 terminals starting with the negative, and unscrew the bolt of the mounting bracket. At this point, you can extract the old battery, insert the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos