Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Mt 15
Part: Engine oil

In this tutorial we can see how to replace the engine oil in the Yamaha MT-15, an extremely simple and quick operation. First of all, we wait for the engine to be cold enough, then we position a container under the motorcycle, locate the drain hole cap and unscrew it using a socket wrench. We then let all the oil in the system drain out, open the filter housing and insert the replacement. At this point, all that remains is to reassemble everything and add the necessary amount of oil through the appropriate upper hole.

Posted on 19 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in a Yamaha MT-15?
How to Change the Engine Oil in a Yamaha MT-15?
Mt 15 In this tutorial, you will learn how to change the engine oil in a Yamaha MT-15, a very simple and quick operation to perform every 12 months. First,…
How to replace the engine oil in the Yamaha MT-15?
How to replace the engine oil in the Yamaha MT-15?
Mt 15 .. In this tutorial, we can see how to replace the engine oil in the Yamaha MT-15, a very simple and quick operation. First of all, make.. …
How to Change the Engine Oil in the Yamaha MT-15?
How to Change the Engine Oil in the Yamaha MT-15?
Mt 15 In this tutorial, we can see how to change the engine oil in the Yamaha MT-15, a very simple and quick operation. First, wait until the engine is coo…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos