Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the engine oil of a Yamaha TW 200, follow these steps. Make sure the engine is warm. Place the motorcycle on a flat surface. Remove the oil drain plug on the bottom side of the engine. Place a container under the plug to collect the used oil. Allow the used oil to drain completely. Once drained, reinsert the drain plug and tighten it securely. Remove the oil fill cap from the top of the engine. Using a funnel, slowly pour new oil into the oil reservoir, checking the recommended quantity in the owner's manual. After adding the oil, reinsert and tighten the fill cap securely. Start the engine and let it run for a few minutes. Check the oil level and add if necessary. Finally, clean up any spills and dispose of the used oil properly.

Posted on 5 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on a Yamaha TW 200?
How to Change the Engine Oil on a Yamaha TW 200?
Tw 200 To change the engine oil on a Yamaha TW 200, loosen the screws that secure the engine guard located at the bottom centre of the bike. Once this guard…
How to replace the engine oil in the Yamaha TW 200?
How to replace the engine oil in the Yamaha TW 200?
Tw 200 In this tutorial we can see how to replace the engine oil in the Yamaha TW 200, an extremely simple and quick operation, to be carried out every 12 m…
How to replace the motor oil in the Yamaha TW 200?
How to replace the motor oil in the Yamaha TW 200?
Tw 200 In this tutorial, we can see how to replace the motor oil in the Yamaha TW 200, a very simple and fast operation. First of all, make sure that the en…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos