Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Yamaha R 6
Part: Battery

In this tutorial we can see how to remove the battery in the Yamaha R6, an extremely simple and quick operation. First of all, make sure that the key is not inserted, then unscrew the two bolts indicated and lift the driver's seat. Next, locate the battery, loosen the fixing screws of the terminals and, starting from the negative, disconnect both. At this point, all that remains is to unscrew the two side bolts, remove the battery, insert the replacement and reassemble everything simply by following the reverse procedure. Make sure to reconnect the positive pole before the negative.

Posted on 9 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a Yamaha R6?
How to Replace the Battery in a Yamaha R6?
Yamaha R 6 Replacing the battery in the Yamaha R6, as shown in this tutorial, is an extremely simple and quick operation. First, ensure that the key is not inse…
How do you replace the battery of the Yamaha R6?
How do you replace the battery of the Yamaha R6?
Yamaha R 6 To replace the battery installed on the Yamaha R6, you need to loosen the screws that secure the seat to its housing: these screws will be located at…
How to remove the side fairings on the Yamaha R6?
How to remove the side fairings on the Yamaha R6?
Yamaha R 6 In this tutorial we can see how to disassemble the side fairings on the Yamaha R6, an extremely simple and fast operation. First of all, we identify …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos