Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, we can see how to replace the front headlight bulbs in the Yamaha YZF-R6, a very simple and quick operation. First of all, make sure that the key is not inserted, so that you can work in complete safety, then locate the cap on the back of the headlight in question and unscrew it. Next, disconnect the power connector, release the metal clip, and remove the old bulb from the housing. At this point, all that remains is to insert the replacement, avoiding touching the glass with bare hands, and reassemble everything following the reverse procedure.

Posted on 3 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on the Yamaha YZF-R6
How to Replace the Front Brake Pads on the Yamaha YZF-R6
Yzf R6 Today, you will briefly see the instructions to remove and replace the front brake pads on the Yamaha YZF-R6 motorcycle. First, place your motorcycle…
How to Replace the Front Brake Pads on Yamaha R6 (2015)
How to Replace the Front Brake Pads on Yamaha R6 (2015)
Yzf R6 Let’s discover the main instructions on how to disassemble and replace the front and rear brake pads on the 2015 Yamaha YZF R6, third series. Start b…
How to Replace the Battery on a Yamaha YZF R6
How to Replace the Battery on a Yamaha YZF R6
Yzf R6 This guide provides instructions for removing and replacing the battery on a Yamaha YZF R6 motorcycle, following these simple steps. First, place you…

How to Reset the Service Light on the Yamaha Xmax 250?

To reset the service light on the Yamaha Xmax 250, you need to insert the ignition key into the appropriate slot, so that you can turn it and switch on the instrument panel. Once this is done, press and hold the central button located on the left side of the instrument panel: the button should be held for about 20 seconds. When released, you will notice that the flashing service light has turned off: to verify that the reset has occurred correctly, you will need to switch off and then switch on the vehicle's instrument panel.

Watch the video!


by ScegliAuto

More videos