Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Nmax
Part: Battery

Today's main steps will show us how to disassemble and replace the battery of the Yamaha Nmax scooter, following the instructions below. First of all, we put the scooter on the center stand and start locating the battery, which we find under the seat (next to the storage compartment); then we disconnect both battery terminals (positive and negative poles), removing it permanently from its compartment, as shown in the video. At this point, we install the new battery, of the correct type and with the same amperage; we make the connection and start the engine!

Posted on 18 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to set the clock on the Yamaha Nmax V2
How to set the clock on the Yamaha Nmax V2
Nmax The steps illustrated in this guide will show us how to modify the clock on the display of the instrument panel of the Yamaha Nmax V2 scooter. First,…
How to disassemble the front fairing on the Yamaha NMAX 250 scooter?
How to disassemble the front fairing on the Yamaha NMAX 250 scooter?
Nmax In this tutorial we can see how to disassemble the front fairing on the Yamaha NMAX 250 scooter, an extremely simple and fast operation. First of all…
Replacing the Front Brake Pads on the Yamaha Nmax
Replacing the Front Brake Pads on the Yamaha Nmax
Nmax Today, discover the instructions to remove and replace the front brake pads on the Yamaha Nmax scooter. First, place the scooter on the centre stand …

How to Top Up the Oil in the Aprilia SR 50 R Scooter?

In this tutorial, you will see how to top up the oil in the Aprilia SR 50 R scooter, a very simple and quick operation to perform periodically. First, open the small lower compartment and retrieve the supplied tools, then remove the screws securing the front panel located at the back. Once removed, locate the oil reservoir, which is on your left, and unscrew the cap. At this point, proceed to top up the oil until you reach the optimal level, then reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos