Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil light on the 2008 Acura RDX

Model: Acura Rdx MK 1 - Years 2006-2012
Part: Service warning light

To manually reset the engine oil light on your first generation Acura RDX (2008), all you need to do is follow the steps described in this new guide dedicated to you. First, reach the driver's seat in the cabin and insert the key, then turn it to turn on the instrument panel. Once this simple operation is completed, press the button located on the right side of the panel multiple times and find the option for the remaining life of the engine oil. At this point, hold down the "Select/Reset" button for about 10 seconds, then release it and press it one last time to confirm the reset of the oil light.

Posted on 29 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the engine oil light in an Acura RDX.
How to reset the engine oil light in an Acura RDX.
Acura Rdx (2019-2026 / MK 3) In this video tutorial, you will see how to reset the engine oil light in an Acura RDX. First, get inside the vehicle and turn on the instrument pane…
How to Replace the Remote Battery in the Acura RDX?
How to Replace the Remote Battery in the Acura RDX?
Acura Rdx (2013-2018 / MK 2) As you can see in this tutorial, replacing the remote battery in the Acura RDX is a very simple and quick operation. To do this, you will need a repl…
How to Change the Key Battery of the Acura RDX 2
How to Change the Key Battery of the Acura RDX 2
Acura Rdx (2013-2018 / MK 2) To change the battery inside your second-generation Acura RDX key yourself, follow the procedure described below. First, purchase a new CR2032 button…

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos