Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Rear Door Panel of the Acura RLX

Model: Acura Rlx KC2, KC1 - Years 2014-2020
Part: Door trim panel

Today, you will see in this video tutorial how to remove the rear door panel of the Acura RLX, following the instructions below. First, open the rear door of your car and start unclipping the panel from the sides by unscrewing all the screws located inside the handle; pry it off to remove it completely, disconnecting the electrical connector of the switch panel and the opening handle cable, as illustrated in the video. Then, reassemble the panel, securing it properly by applying the reverse procedure!

Updated on 14 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Acura Rlx (2014-2020 / KC2, KC1) In this guide, you will learn how to manually reset the oil light on your 2020 Acura RLX. First, start the instrument cluster and the central onboard…
Acura Rlx (2014-2020 / KC2, KC1) In this tutorial, you will see how to reset the oil service light in the Acura RLX, a very simple operation. Before proceeding, make sure you have co…
Acura Rlx (2014-2020 / KC2, KC1) In this guide for 2014 Acura RLX owners, you will learn how to manually set the time. First, get inside the vehicle and turn on the instrument cluste…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos