Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Acura
    3. :
  3. Tlx
    4. : How to change oil and oil filter on Acura Tlx

Acura Tlx - Video tutorial

Model: Acura Tlx MK 5 - Years 2015-2020
Part: Engine oil
Operation: How to change oil and oil filter on Acura Tlx

To replace the oil and the oil filter of the Acura Tlx, we start by removing the upper engine protection, unscrewing the oil filler cap; now we go under the car, unscrew the oil drain plug, let the oil drain into a container; while the oil drains, unscrew the oil filter with a special wrench and let the oil drain into the same container; having also drained the oil from the filter, we clean the seat of the oil drain plug and the seat of the oil filter; we take the new oil filter, pour new oil into it, screw it back into its seat and screw the oil drain plug back on. Screw the drain plug and oil filter back on, go over the car, insert the funnel into the oil filling hole, pour the liters indicated by the manufacturer, when we are approximately on the indicated liters check the level with the dipstick check (the level must be checked the second time the dipstick is removed), if the oil level is on the "max" notch the operation is finished otherwise top up.


Posted on 16 November 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos